Molson Valley

Building

DAWCO has been awarded an electrical construction mandate for the construction of the new Molson brewery.

See the project

Baffinland - Ship Loader Upgrade

Mining & Metallurgy

The DCM team in Nunavut completed the refurbishment of the conveyor system on the massive Ship Loader #1.

See the project

Mechanical/Piping Work on Screens & LIMS

Mining & Metallurgy

DCM’s mandate was to complete the installation of three screens decks, three secondary flow distributors and one low intensity magnetic separator (LIMS) in the Ball Mill Mag Plant.

See the project

MIFFC Southwest Terminal Gate Expansion

Infrastructure

The objective of this project is to increase the fuel distribution capacity for aircrafts at the Pierre Elliott Trudeau International Airport.

See the project

Phase 2 Pilot - Next Gen Deoiling

Oil & Gas

Civil, Structural & Rigging, Piping, Electrical, and Insulation works related to the installation of a Phase 2 Pilot Project for Next Generation Deoiling.

See the project

Norsk Hydro – Plant dismantling

Mining & Metallurgy

In the context of the closure of the plant, DAWCO’s mandate was to dismantle equipment involved in the production of magnesium.

See the project

CHU Sainte-Justine - Temporary 25kV Power System

Building

DAWCO was mandated to complete work on the temporary 25kV power system at the CHU Sainte-Justine.

See the project

Eaux Vives Harricana – Bottling Plant (Eska water)

Infrastructure

DAWCO was mandated to perform a wide range of works in the context of the construction of a new water bottling plant:

See the project

Fortress Paper – Speciality Cellulose

Pulp & Paper

As part of the expansion project for the addition of a 5th digester at the Fortress Paper plant in Thurso, a surface condenser that was removed from service in 2011 had to be restored.

See the project

Notre-Dame Church Refurbishment (Lot 3 – Construction)

Building

DAWCO was mandated to perform electrical and telecommunications work on the transformation and expansion of the Notre-Dame Church into spaces used by the CEGEP de Granby.

See the project

The Power Generator Replacement Project at the Hôpital de Rivière-Rouge

Building

Mandate includes modifications to the building’s main distribution and the installation of the power generator and all related accessories.

See the project

Montreal Biodome – Electrical Network Upgrade

Building

DAWCO was mandated to perform electrical work related to the electrical network upgrade at the Montreal Biodome.

See the project

AML Cruise Ship Terminal (Building)

Building

DAWCO was mandated to perform electrical work as part of the construction of a building at the AML cruise ship terminal.

See the project

Fort Hills Cogeneration Facility

Power

Finalization of multiple scopes including piping, mechanical, electrical, structural, building cladding, HVAC refrigerant and exhaust piping, air blowing and chemical flushing, general labouring activities and support services.

See the project

National Defence Longue-Pointe Garrison

Building

The National Defence Longue-Pointe Garrison awarded DAWCO a mandate to perform electrical and telecom works.

See the project

MIFFC Trudeau fuel depot project

Infrastructure

The objective of this project is to increase the fuel storage capacity for aircrafts at the Pierre Elliott Trudeau International Airport.
In the coming years, the airport intends to further improve its facilities and thus help alleviate the limited flexibility of the fuel depot.

See the project

Davie – Resolve Conversion Project - MV Asterix

Infrastructure

DCM / DAWCO was mandated by Davie Shipyard to complete electrical and instrumentation work as part of the major conversion of the “Amorito” container ship into an Interim Auxiliary Oil Replenishment (IAOR) Vessel for the Canadian Navy that will be named “MV Asterix”.

See the project

Suncor Skids

Oil & Gas

DCM/JYNT was awarded a contract by GCM to perform the fabrication of three (3) piping modules and one control module for the Suncor site in Fort McMurray, Alberta.

See the project

Major Renovations to Fire Station #26

Building

The Geyser Group, which was awarded the contract to perform major renovation work to Fire Station #26 in the Plateau Mont-Royal borough, mandated DAWCO to carry out work on the electrical distribution and security system.

See the project

Alexandra Pier

Building

DAWCO was mandated to perform electrical work as part of the parking lot development project at the Alexandra Pier, in the Old Port of Montreal.

See the project

Institut Pinel - Fire Alarm System Replacement

Building

The project consists of modification work on the fire alarm system to bring it into compliance with the new standards.

See the project

Polyvalente W.A. Losier - Mid-Life Upgrade Phase 1

Building

DAWCO’s mandate comprised all electrical requirements for the renovation of the existing school in Tracadie-Sheila.

See the project

Dorchester Penitentiary – Generator Replacement

Building

As a general contractor, DAWCO was given the mandate to replace a 600kW generator and all of its attached components. Structural work for the new ventilation system as well as a few modifications to the mechanical systems were also necessary to complete the project.

See the project

AMT – New Pointe Saint-Charles maintenance workshop

Building

Pomerleau awarded DAWCO the mandate to work on the new AMT Pointe St-Charles maintenance workshop to complete the 25kV distribution down to the 120V feeds. Our mandate also includes setting up the lighting and all the services usually included in a building of this type. Important partners were involved in this project carried out using the design-built method.

See the project

Bridgestone - 2015 Renovation - Lot 1

Infrastructure

The expansion project at the Bridgestone plant in Joliette consisted largely of changes to the 600V distribution. A long stretch of bus bar was installed to move existing equipment.

See the project

Weir Canada - New Head Office

Building

DAWCO was awarded an electrical, telecom and security mandate for Weir Canada – New head office.

See the project

University of Montreal - Fire alarm system overhaul

Building

As a general contractor, DAWCO was responsible for replacing and updating the existing fire alarm system at the Marguerite-d’Youville Pavillon at University of Montreal.

See the project

National Defence's Naval Engineering Test Establishment

Building

Pomerleau awarded DAWCO a mandate to work on National Defence's Naval Engineering Test Establishment (NETE).

See the project

Miramichi Regional Hospital - Replacement of 2 Emergency Generators

Building

As a general contractor, DAWCO was awarded a mandate to replace two generators at the Miramichi Hospital.

See the project

Miramichi East School

Building

DAWCO’s mandate comprised all electrical requirements for the new school, including: distribution, feeders, underground ducts, wiring devices, branch wiring, lighting, communications, PA, intercom, fire alarm, lockdown, access controls, and security alarm. The new school is approximately 69,000 square feet.

See the project

École Polytechnique - Upgrades to various systems

Building

DAWCO obtained a mandate to upgrade various systems at Polytechnique Montréal.

See the project

Ericsson Global ICT Center

Building

The first part of the mandate was the installation of ABB’s management system (BMS building, EMS Energy and PMS Power) components:
- Installation of control panels
- Connection of control panels
- Installation of conduits and cable trays
- Cable and fiber optic wiring

See the project

Suncor Energy - Mackay River MR1 Produced Gas Debottleneck

Oil & Gas

DCM was awarded a mandate to perform the removal and replacement of a produced gas system with upgraded vessels and piping.

See the project

Suncor Energy - CO2 tank for pad 24

Oil & Gas

DCM was awarded a mandate to perform mechanical, electrical, civil and structural installations at Pad 24.

See the project

Suncor Energy – Ammonia / NCG Co-Injection

Oil & Gas

Suncor Energy awarded DCM the mandate to install various equipment and complete tie-ins for the new Ammonia / NCG Co-Injection process systems at the Mackay River SAGD facility.

See the project

Vacuum Distillation Units

Oil & Gas

Following the completion of the HSU Unit for Tecnicas Reunidas (TR), DCM was awarded a mandate to perform the testing for DRU/VDU facilities currently under construction.

See the project

TKIS SPP Train 4&5

Oil & Gas

Thyssenkrupp Industrial Solutions (TKIS) awarded DCM a contract for performing electrical and instrumentation work on the new trains 4 & 5.

See the project

Area 30 Hydrogen Plant

Oil & Gas

DCM was mandated to complete a scope of work associated with the new H2CO2 site under construction at the Horizon facility. This scope of work was awarded to DCM based on its expertise and extensive knowledge of the facility.

The scope comprises mechanical & piping construction activities, including installation, punch items, hydrotesting, reinstatement, and specialty welding associated with the reformer furnace (ASME Section 1 welding).

See the project

FAM - Trains 4 & 5 Piping

Oil & Gas

DCM supplied all materials, fabricated & installed all piping for trains 4 & 5.

See the project

Manpower supply for the DRU/VDU/HSU

Oil & Gas

Tecnicas Reunidas awarded DCM a mandate to complete electrical punch items, lighting, grounding, pre-commissioning, and commissioning work, as well as small tasks related to the relocation of JBs and cable trays to support fireproofing activities.

See the project

Cogen

Oil & Gas

DCM was awarded a contract for the installation and pre-commissioning of the new GE Cogen facility at the Horizon site which includes all phases and trades.

See the project

Multi-trade Maintenance

Oil & Gas

Since 2009, DCM works closely with the team from U2 Maintenance to ensure maximum operational readiness of the facility in the downstream process area and utilities. In 2015, DCM took over the management of all trades in an effort to further streamline the maintenance process and increase cost efficiency. At present, DCM's mandate includes regular and emergency maintenance activities, shop fabrication, planning and quality control.

See the project

Linde / Gaz Métro - Module assembly

Oil & Gas

DCM was awarded a mandate to assemble modules for the Linde Process Plant project whose objective was to increase LNG capacity at the Gaz Métro plant in East-End Montreal.

See the project

Glycol Recycling Facility (YYC)

Infrastructure

DCM was awarded a construction mandate at the Calgary Airport Glycol Recycling Facility.

See the project

Expansion of commercial sector and VIP lounges - Lot 3

Building

As part of the expansion of the commercial sector and VIP lounges of the Montreal Airport, Construction Cogela Inc. commissioned DAWCO to perform the electrical and telecommunications work on the project.

See the project

Bombardier – Final Assembly Line

Building

As part of the construction of Bombardier’s new Mirabel "FAL" plant, where the new C-Series aircraft will be assembled, DAWCO was commissioned by Pomerleau Inc. to perform electrical and telecommunications work.

See the project

Cité Nature - Phase III

Building

Opron Construction Inc. commissioned DAWCO to complete electrical, telecommunications and security work for a 15-storey condo building.

See the project

Lumen – Construction of a new distribution center

Building

Loracon / Cosoltec commissioned DAWCO to carry out the electrical work on Lumen’s new 268,000-square-foot distribution center.

See the project

Irving – Modernization of naval shipyard

Infrastructure

Plan Group of Ontario commissioned DAWCO to perform electrical work for assembly buildings and administrative offices. The manufacturing plant has two main buildings linked together. The first building is 200 feet wide by 1,000 feet long and 80 feet high, while the second building is 200 feet wide by 350 feet long and 150 feet high.

See the project

Renovation of Dalhousie train station

Building

The Dalhousie train station was built in 1884. Since 2004, it has been home to Cirque Éloize’s head office and creative studio. For this heritage building, the Geyser Group commissioned DAWCO to perform interior renovations.

See the project

New maximum-security unit, Atlantic facilities

Building

Pomerleau Inc. commissioned DAWCO to perform electrical work for the federal prison in Renous, in the new maximum-security unit, which consists of 96 individual cells.

See the project

Merck – Building expansion (South end)

Building

Broccolini Construction commissioned DAWCO to perform electrical work related to the expansion and renovation of the new multi-tenant office complex.

See the project

University of Montreal – Emergency panel upgrade - Thermal power station (512)

Building

DAWCO’s mandate was to improve and ensure the continuity of electromechanical services of University of Montreal’s Thermal power station (Pavilion 512).

See the project

Multisports center in Vaudreuil-Dorion

Building

Verreault Inc. awarded DAWCO the mandate to install an electrical distribution system for the new Multisports center in Vaudreuil-Dorion.

See the project

Kruger Wayagamack Inc – Wayagamack paper machines 2 & 3

Pulp & Paper

DCM provided electrical and instrumentation services for the Kruger Wayagamack pulp and paper mill in Trois-Rivières, Quebec.

See the project

Kruger Wayagamack Inc – Plant substation modification (power, control and distribution)

Pulp & Paper

DCM provided electrical and instrumentation services for the Kruger Wayagamack pulp and paper mill in Bromptonville, Québec.

See the project

Fortress Specialty Cellulose – Economizers Tube Replacement

Pulp & Paper

DCM was awarded the mandate to provide mechanical & piping services for a pulp and paper mill in Thurso, Quebec.

See the project

Smurfit-Stone – Annual plant shutdowns

Pulp & Paper

DCM was awarded the mandate to provide mechanical and piping services in a pulp and paper mill in Portage-du-Fort, Quebec.

See the project

TransCanada Energy – Combined cycle cogeneration power plant

Power

SNC-Lavalin awarded DCM the mandate to provide electrical and instrumentation services for a major combined cycle cogeneration power plant.

See the project

New Brunswick Power – Thermal Power Plant Conversion

Power

DCM was awarded the mandate to provide electrical and instrumentation services for the conversion of a thermal power plant.

See the project

Newington Energy – Thermal power plant with cogeneration (550MW)

Power

Duke Fluor Daniel awarded DCM the mandate to provide electrical and instrumentation services required for the construction of gas and vapor turbines part of a thermal power plant.

See the project

Hydro-Québec – Beauharnois Generating Station

Power

DCM was awarded the mandate to provide mechanical, piping, electrical, instrumentation and civil services for a hydro-electric facility in Beauharnois.

See the project

Hydro-Québec – Poste Bélanger

Power

Siemens Canada Ltd awarded DCM the mandate to install a 315KV sub-station for a Gas Insulated Switchgear (GIS).

See the project

Enerkem – Cellulosic Ethanol pilot plant

Petrochemicals & Chemicals

DCM was awarded the mandate was to provide mechanical, piping, electrical and instrumentation services for a Cellulosic Ethanol pilot plant.

See the project

Petro-Canada – Diesel desulphurization unit

Petrochemicals & Chemicals

SNC Lavalin awarded DCM the mandate to provide mechanical, piping, electrical and instrumentation services for a new distillate desulphurization unit at the Montreal Petro-Canada refinery.

See the project

PTT Poly Canada – Polytrimethylene terephthalate (PTT) Plant

Petrochemicals & Chemicals

SNC Lavalin awarded DCM the mandate to provide mechanical, piping, electrical and instrumentation services for building a new Polytrimethylene terephthalate (PTT) plant.

See the project

Interquisa Canada – Terapthalic acid (PTA) plant

Petrochemicals & Chemicals

DCM provided mechanical, piping, electrical and instrumentation services for a Terapthalic acid (PTA) plant in Montreal.

See the project

Shell Canada – Gasoline and diesel desulphurization units

Petrochemicals & Chemicals

DCM was awarded the mandate to provide electrical and instrumentation services for gasoline and diesel desulphurization units at the Montreal Shell refinery.

See the project

Gazoduc Trans Québec & Maritimes Inc. (TQM) – Lachenaie gas compressor station

Oil & Gas

DCM was awarded the mandate to provide mechanical, piping, electrical and instrumentation services for TQM’s gas compressor station in Lachenaie, Quebec.

See the project

Gazoduc Trans Québec & Maritimes Inc. (TQM) – East Hereford compressor station

Oil & Gas

DCM was awarded the mandate to provide electrical and instrumentation services for TQM’s gas compressor station in East Hereford, Quebec.

See the project

Praxair – Storage tank relocation

Oil & Gas

DCM provided mechanical and piping services for Praxair’s nitrogen and oxygen pipelines and storage tanks in Montreal, Québec.

See the project

Canaport LNG – Gas liquefaction Process Unit

Oil & Gas

SNC-Lavalin awarded DCM the mandate to provide mechanical, piping, electrical and instrumentation services for the Canaport LNG Gas liquefaction Process Unit.

See the project

ArcelorMittal Mines Canada – Sludge Thickener

Mining & Metallurgy

DCM was awarded the mandate to provide civil, structural, mechanical and piping services for the construction of the Mount Wright Iron Mining Complex.

See the project

Mosaic Potash – Potash Mine Processing Plant and Tailings Piping

Mining & Metallurgy

Hatch mandated DCM to complete construction work on the Mosaic Colonsay Potash Mine Processing Plant and Tailings Piping. The scope included the installation of mechanical equipment and piping work.

See the project

Mosaic Potash – K3 Esterhazy

Mining & Metallurgy

Hatch awarded DCM the mandate to provide mechanical, piping, electrical and instrumentation services for the Mosaic Esterhazy potash mill.

See the project

Magnola – Magnola Plant

Mining & Metallurgy

SNC-Lavalin awarded DCM the mandate to provide electrical and instrumentation services for the construction of the four main substations part of the Magnola plant.

See the project

Aluminerie Alouette – Smelter Expansion

Mining & Metallurgy

DCM was awarded the mandate to provide electrical and instrumentation services for the smelter expansion project at Aluminerie Alouette.

See the project

Rio Tinto Alcan – AP60 plant

Mining & Metallurgy

SNC Lavalin/Hatch awarded DCM the mandate to provide electrical and instrumentation services for the AP60 plant.

See the project

Alumerie Bécancour – Plant upgrades

Mining & Metallurgy

Hatch awarded DCM the mandate to revamp the control system as part of the production increase associated with the molten metal project at Alumerie Bécancour Inc.

See the project

Agence Métropolitaine de Transport – Traction rectifiers for the Montreal subway system

Infrastructure

DCM was awarded the mandate to provide electrical services for traction rectifiers for the Montreal subway system.

See the project

Montreal International Fuel Facilities Corporation (MIFFC) – North Terminal Expansion

Infrastructure

DCM was awarded the mandate to provide mechanical & piping services for the MIFFC North Terminal Expansion project at the Montreal Pierre-Elliott Trudeau airport.

See the project

Viterra – Montreal Terminal Dust Collection, Transport & Storage System

Infrastructure

Viterra awarded DCM the mandate to provide mechanical, piping, electrical and instrumentation services for the Montreal Terminal Dust Collection, Transport & Storage System.

See the project

Suncor Energy - Debottlenecking

Oil & Gas

DCM’s mandate was to execute work on piping and a high pressure steam generator, including steel prefabrication and installation, insulation, and electrical & instrumentation.

See the project

Imperial Oil (Thyssen Krupp) – Kearl Lake

Oil & Gas

ThyssenKrupp Industrial Solutions (Canada) awarded DCM the mandate to supply, fabricate and install the piping for 2 trains as part of the Slurry Preparation Process at the Kearl Expansion Project (KEP) in Northen Alberta.

See the project

Hydrogen Sulphide Unit

Oil & Gas

Tecnicas Reunidas awarded DCM the mandate to install structural steel, mechanical equipment, piping, electrical, instrumentation and insulation components for the erection of the Hydrogen Sulphide Unit.

See the project

Delayed Coker Unit

Oil & Gas

DCM’s mandate was to provide electrical and instrumentation services for the construction of a new Delayed Coker Unit.

See the project

Early pump house

Oil & Gas

DCM was awarded a contract for the construction of a tailing line booster pump house to support the efficient expansion of the facility.

See the project

Butane Treating Unit

Oil & Gas

DCM was awarded the contract to provide mechanical and piping services for the construction of the butane processing plant.

See the project

Gas Recovery Unit

Oil & Gas

DCM’s mandate was to assemble, move and install the gas recovery unit super module. This work required the involvement of mechanical, piping, electrical and instrumentation teams.

See the project

Primary Upgrader

Oil & Gas

Technip awarded DCM the mandate to perform electrical and instrumentation work including over 400 km of electric heat tracing complete with instrumentation and power distribution.

See the project

Upgrading and Utilities Maintenance

Oil & Gas

DCM provides mechanical, piping, scaffolding, insulation and electrical & instrumentation maintenance services for the Upgrading and Utilities division.

See the project

Debottlenecking 2014

Oil & Gas

DCM’s mandate was to execute pre shut-down and shut-down activities at the Horizon Oil Sands facilities.

See the project

Syncrude (Thyssen Krupp Industrial Services) – Mildred Lake Mine Replacement

Oil & Gas

ThyssenKrupp Industrial Solutions (Canada) awarded DCM the mandate to perform off-Site fabrication, on-site installation, and electrical heat tracing of piping for two slurry preparation buildings for the Mildred Lake Mine Replacement project at Syncrude.

See the project

Syncrude (ABB and Siemens) - Modular e-house

Oil & Gas

ABB and Siemens awarded DCM the mandate to construct 6 Integrated e-houses for an oil sands operation in Northern Alberta.

See the project